System Admin

FirstPrevNext

Re: MTU & TTL Venet3-Aug-02 2:10 Venet 3-Aug-02 2:10  TTL field is set on the originating machine, so changing MTU on another machine, has nothing to do with changing the TTL value on the originating machine. zhero70 wrote: after I optimized the machine X and I "ping" it again I got TTL = 56. zhero70 wrote: I also know the machine X could have any of the MS system , but definetly not Linux or Mac OS. Sounds a bit strange, that you've optimised machine X, but don't know for sure what OS it is running! Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) Re: MTU & TTL zhero707-Aug-02 7:10 zhero70 7-Aug-02 7:10  Ok... I rephrase my question so I ll get better answer than this one... Some friend told me he got Windows XP connected to the net with ADSL.He also tell me his I.P. address , and ask me to ping his machine and tell him what I got.I noticed I got a TTL value of 237 ...(My friend was interested in the request time in ms and not the TTL I got) The next morning , the same friend ask me again to ping his machine , and then I am suddenly suprised to see his TTL changed to 56 ! So I asked him what is going on ? And I get for answer :"I install a reg patch from "speedguide.net" to optimized my machine , to change its MTU". Is it possible that changing the size of a packet can actually change the time it's travelling through routers ? Wise answers only , please.. ZhErHo@@7o Re: MTU & TTL Venet7-Aug-02 22:14 Venet 7-Aug-02 22:14  zhero70 wrote: Wise answers only , please.. How do you mean wise ? Your question was a bit stupid really. You said that you have optimised a machine and don't know what OS is it running on !!!! Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) Event Viewer GBlank31-Jul-02 21:27 GBlank 31-Jul-02 21:27  Is anyone knows what does Event Viewer Event ID 27 means. I get an Exclamation box , on the windows , and when i look at the event viewer i see that the event for this erro is 27. Thanks guys. Re: Event Viewer adara3-Aug-02 19:08 adara 3-Aug-02 19:08  http://www.eventid.net/display.asp?eventid=27&source= Re: Event Viewer Venet4-Aug-02 6:50 Venet 4-Aug-02 6:50  Event Viewer doesn't keep a database of Event IDs that are associated with an error message. It's up to the application that generates errors, to regitster Event ID's and associated error messages. Error ID 27 could mean anything. This is relative to the application itself, not the actual Event Viewer. Usually whenever an error ID is not registred, Event Viewer will give you some more information about the error itself and usually the app. return code. I suggest look at that string again and see what app. is generating it. Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) Upgrading home WinXP to professional WinXP rsasalm_30-Jul-02 1:51 rsasalm_ 30-Jul-02 1:51  Hi all, I want to upgrade my PC from Home WinXP to professional WinXP. I wonder how to install WinXP professional so that I don't lose any data. Any help or pointer to help will be appreciated. Further any pointer where I can find the difference between winXP home and winXP professional. regards /rsasalm XP, svchost, and helpsvc Marc Clifton28-Jul-02 8:27 Marc Clifton 28-Jul-02 8:27  If I leave my XP (professional version) alone for a few hours, the HELPSVC and SVCHOST processes start up and start eating megabytes of RAM (500MB+). How do I stop this? What's going on in the background? It doesn't seem like XP is a very stable platform for long-term usage, like a server app. Should I be using W2000 server instead? Thanks, Marc Re: XP, svchost, and helpsvc Venet29-Jul-02 1:04 Venet 29-Jul-02 1:04  Have you reviewed your Event Viewer? Could be that some service is failing and svchost trying to start it up again over and over. Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) Re: XP, svchost, and helpsvc Marc Clifton30-Jul-02 14:15 Marc Clifton 30-Jul-02 14:15  Thank you for the suggestion. The problem appears to coincide with this message: "The COM+ Event System detected a corrupt IEventSubscription object. The COM+ Event System has removed object ID {71EDA56F-317A-11D2-98A9-00C04F8EE1C4}-{41E90F3E-56C1-4633-81C3-6E8BAC8BDD70}-{00000000-0000-0000-0000-000000000000}. The subscriber will no longer be notified when the event occurs." Any ideas? I'll have to root around now that you've given me a clue. Thanks again, Marc Fixed... yet another query sultan_of_6string28-Jul-02 4:01 sultan_of_6string 28-Jul-02 4:01  Okay, I got over the LILO problem in my last post, but I've got another problem. The genius that is the Windows installer has made C: my system partition and D: my boot partition. I need to make C: my boot partition as well (cuz D is beyond the 1024 cylinder limit of LILO). How do I do this? Simply copying ntldr and company doesn't work. Thanks. Re: Fixed... yet another query Venet28-Jul-02 5:38 Venet 28-Jul-02 5:38  Ok first of all, it's a bad idea installing LILO on your MBR, as I'm sure you've found out yourself. sultan_of_6string wrote: I need to make C: my boot partition as well You can have only one boot partition, can't have more. To make a partition bootable, use fdsik. Make a Win9x boot floppy and copy fdisk.exe in there. Start your machine from the disks and run fdisk. It will give you the option of making a partiton bootable. The best (that is, safest) way to go, is to install LILO on secondary partition and copy the first 512 bytes of the second partiton to the first one. Add an entry to boot.ini file to point to this new file of 512 bytes. And that's it.... Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) Re: Fixed... yet another query sultan_of_6string28-Jul-02 6:06 sultan_of_6string 28-Jul-02 6:06  Thanks for the response. You seem to know about this so could you help me out here? I've read about this stuff of copying the first 512 bytes, but it doesn't seem to make sense. Won't it corrupt my NTFS partition? If you could give me a few points or link me to a decent article, it would be great. Plus, I got the strange feeling I'm posting on the wrong website... any suggestions? Thanks. Re: Fixed... yet another query Venet28-Jul-02 7:45 Venet 28-Jul-02 7:45  sultan_of_6string wrote: I've read about this stuff of copying the first 512 bytes, but it doesn't seem to make sense. Won't it corrupt my NTFS partition? Nope, it won't. You are copying 512 bytes of secondary partition. To do this: boot up in linux. If you're running X-Windows open console (as root) and type dd if=/dev/hda2 of=/tmp/bootsect.lnx bs=512 count=1 (provided /dev/hda2 is your linux partiton, if you have separate hard disk, it might be /dev/hdb1) This will copy the boot sector of the linux partition. Now, copy this file onto a floppy disk Provided that floppy disk is mounted in /mnt/floppy execute the following cp /tmp/bootsect.lnx /mnt/floppy or mount -t vfat /dev/fd0 /mnt/floppy if floppy is not mounted. (in here make sure /mnt/floppy directory exists) Boot in WinXP Copy bootsect.lnx from floppy to the C:\ Open boot.ini file. It should look something like: ----------------------------- [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows 2000 Professional" ------------------------------- Add this line to the end of boot.ini C:\BOOTSECT.LNX="Linux Rocks" Save and Close. That's it, reboot your WinXP and there ya go. Note: This assumes that you've installed lilo on your secondary partition. For how to do that, you might want to read lilo man page. Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) Re: Fixed... yet another query sultan_of_6string28-Jul-02 8:39 sultan_of_6string 28-Jul-02 8:39  Thanks a lot. I tried that, but whenever I try to boot to RHL, the system restarts. My config is a little wierd: Partition 1: Drive C NTFS--System Partition 2: Linux /boot Partition 3: Linux root (beyond LILOs 1,024 cylinder limit) Partition 4: Linux Swap Partition 5: Drive E NTFS--Boot (don't ask why, I can't figure it out) So, I installed LILO to the /boot partition and used dd, but it didn't work. Argh! Why must NT hijack my MBR?! Re: Fixed... yet another query Venet29-Jul-02 1:02 Venet 29-Jul-02 1:02  Ok try this command lilo -s ./bootsect.lnx It should do the same thing as in my previous post. sultan_of_6string wrote: whenever I try to boot to RHL, the system restarts Can you get into Linux at all ? You might want to try booting from the Linux CD, if you haven't created any bootable floppies and then execute the above command. Let me know how you get on. Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) Re: Fixed... yet another query Anonymous29-Jul-02 7:04 Anonymous 29-Jul-02 7:04  Thanks a lot for the reply, but I'm gonna have to wait a bit. I tried a third-party bootloader (Bootmagic or something) and it fried my MBR. XP refused to load and RHL simply restarted my system. RHL setup said that my disk geometry is messed up. Didn't know what that meant but it didn't sound good. Well, now I'm back to Win98 and my parents aren't too keen on Linux, so I'll just put XP on this machine and try out Linux again in college. A few days was enough to get me super-excited about projects like Gnome and Mono. Programmer's paradise! Red Had Linux screwed XP sultan_of_6string27-Jul-02 5:37 sultan_of_6string 27-Jul-02 5:37  So, I needed to install RHL 7.1 for academic reasons. I deleted one of my extra NTFS partitions and installed RHL into it. The thing is, I installed LILO to the MBR. RHL setup didn't detect my XP boot partition. Manually adding it to lilo.conf results in an error: NTLDR not found. What have I done? How do I fix it? Thanks. Re: Red Had Linux screwed XP Anonymous29-Jul-02 9:13 Anonymous 29-Jul-02 9:13  well lets see.. sounds like LILO screwed the MBR . put in the XP cd and go to the recovery console... do: fixmbr and fixboot [drive] (in anything lower than 2K than you would use: fdisk /mbr) --------------------------- after this, if it still does not work, try copying NTLDR from another xp computer or somewhere... to the [drive]:\ (root dir.) good luck Re: Red Had Linux screwed XP Nemanja Trifunovic29-Jul-02 9:35 Nemanja Trifunovic 29-Jul-02 9:35  Anonymous wrote: fixmbr and fixboot [drive] (in anything lower than 2K than you would use: fdisk /mbr) --------------------------- Before you do that, login to Linux and configure your LILO to be placed at the beginning of your Linux partition (not MBR). Than copy LILO to a floppy disk (with dd command), restore your Win XP, copy the file from the floppy to C:\, and add another line to boot.ini. This way, you will be able to boot to either XP or Linux. For more detailed instructions, take a look at this article . I vote pro drink Re: Red Had Linux screwed XP Jason Hihn2-Aug-02 6:55 Jason Hihn 2-Aug-02 6:55  Lol. XP does the same thing to Linux then it sees it! ICS and SMTP problem... Rocky Moore26-Jul-02 17:13 Rocky Moore 26-Jul-02 17:13  Okay, I have multple computers running XP connected to a server machine running Windows 2000 Adv Server with two lan cards, one for the local net and another for the broadband internet connection with Internet Connection Sharing enabled on the broadband connection. Now, I can run a simple e-mail program that will send mail out via SMTP to the server targetted in the e-mail message "To" field. This works fine on any of the machines on the local lan and the message goes anywhere on the Internet I wish to send it. When I run this same program on the server machine (that has just had the OS freshly installed) I keep getting an error message: ERR An existing connection was forcibly closed by the remote host That happens regardless of where it is sent. When the same program is ran on any of the local net machines, it sends the message any where on the Internet without a problem. Any clues why it would work on the local machines but the server would choke and kick back that error? The message are still being sent through that machine by the local machines over the ICS? Rocky Moore Rocky Moore Re: ICS and SMTP problem... Venet26-Jul-02 21:20 Venet 26-Jul-02 21:20  Have you specified on your program which interface you want to use? Regards, Venet. -------- Black holes are where God divided by zero.(Steven Wright) How to get server system time? Tida25-Jul-02 11:06 Tida 25-Jul-02 11:06  Hi, I need to get server side system time from my computer Is there any function to do this? Thanks Background image under solaris. Williams23-Jul-02 8:08 Williams 23-Jul-02 8:08  I want to put a JPG image as my desktop background. How can I get it.

Last Visit: 31-Dec-99 18:00     Last Update: 3-Oct-24 17:22 Refresh ᐊ Prev1...452453454455456457458459460461 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.