|
So, I needed to install RHL 7.1 for academic reasons. I deleted one of my extra NTFS partitions and installed RHL into it. The thing is, I installed LILO to the MBR. RHL setup didn't detect my XP boot partition. Manually adding it to lilo.conf results in an error: NTLDR not found. What have I done? How do I fix it? Thanks.
|
|
|
|
|
well lets see.. sounds like LILO screwed the MBR   . put in the XP cd and go to the recovery console... do:
fixmbr
and
fixboot [drive]
(in anything lower than 2K than you would use: fdisk /mbr)
---------------------------
after this, if it still does not work, try copying NTLDR from another xp computer or somewhere... to the [drive]:\ (root dir.)
good luck
|
|
|
|
|
Anonymous wrote:
fixmbr
and
fixboot [drive]
(in anything lower than 2K than you would use: fdisk /mbr)
---------------------------
Before you do that, login to Linux and configure your LILO to be placed at the beginning of your Linux partition (not MBR). Than copy LILO to a floppy disk (with dd command), restore your Win XP, copy the file from the floppy to C:\, and add another line to boot.ini. This way, you will be able to boot to either XP or Linux.
For more detailed instructions, take a look at this article .
I vote pro drink ![Beer | [beer]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/beer.gif)
|
|
|
|
|
Lol. XP does the same thing to Linux then it sees it!
|
|
|
|
|
Okay, I have multple computers running XP connected to a server machine running Windows 2000 Adv Server with two lan cards, one for the local net and another for the broadband internet connection with Internet Connection Sharing enabled on the broadband connection.
Now, I can run a simple e-mail program that will send mail out via SMTP to the server targetted in the e-mail message "To" field. This works fine on any of the machines on the local lan and the message goes anywhere on the Internet I wish to send it. When I run this same program on the server machine (that has just had the OS freshly installed) I keep getting an error message:
ERR An existing connection was forcibly closed by the remote host
That happens regardless of where it is sent.
When the same program is ran on any of the local net machines, it sends the message any where on the Internet without a problem.
Any clues why it would work on the local machines but the server would choke and kick back that error? The message are still being sent through that machine by the local machines over the ICS?
Rocky Moore
Rocky Moore
|
|
|
|
|
Have you specified on your program which interface you want to use?
Regards,
Venet.
--------
Black holes are where God divided by zero.(Steven Wright)
|
|
|
|
|
Hi,
I need to get server side system time from my computer
Is there any function to do this?
Thanks
|
|
|
|
|
I want to put a JPG image as my desktop background.
How can I get it.
|
|
|
|
|
Hi,
I'm trying to use a link like
[a href="\\server\mailarchive\mymail.eml"]mymail[/a]
to open a mail saved as .eml in Outlook Express.
double-clicking the .eml file in Windows explorer does as it should (start OE, and open the .eml for viewing, the command line is msimn.exe /eml:%1)
Using a link in a web page (as given above) displays the mail body directly in IE (however, I can't access attachments etc.)
Where/how can I change this, to open the file directly in OE?
TIA
Peter
You don't need to sleep to see a nightmare Anne Clark [sighist]
|
|
|
|
|
Do you have ZoneAlarm, or any other PC Firewall running?
eml was the extension that nimda used to propogate (spelling?) itself a few months back. So, alot of firewalls, or antivirus software blocks execution of that extension.
Hope that helps.
Frank
|
|
|
|
|
Frank Deo wrote:
Do you have ZoneAlarm, or any other PC Firewall running
No, nothing of that. IE seems to recognze them as "can be displayed in-place", like it does/can do with Office documents, or Acrobat .PDF's. (Acrobat reader has an option to turn this off, so I hope I can find the same for OE)
You don't need to sleep to see a nightmare Anne Clark [sighist]
|
|
|
|
|
I wrote some software and tested it on about 5 different PCs, all with different hardware configurations and varying Windows operating systems. After correcting a few bugs and taking care of platform independent problems, I thought the software was ready to roll. So, I wrapped it up and got it out there. However, now that it is available, I'm finding that it doesn't run correctly on MOST of the PCs that people are trying to run it on. What is the deal? How can I guarantee that my software will work??? I used a Microsoft compiler on a Microsoft Operating System using only Microsoft libraries. My software is the buggiest piece of !@#*@$. Doesn't it make sense that if it works 100% on one PC, that it should do the same on any other? Please crawl into a corner and die, Microsoft. Anybody have any advice for me??? How do I test my program in a way that I can be sure that it will work on the majority of other peoples' computers??? 
Johnny
http://www.draw-bridge.com
|
|
|
|
|
JohnnyNin wrote:
Anybody have any advice for me???
Link statically.
Test it on fresh-installs.
Use VMWare for testing.
Concussus surgo.
When struck I rise.
|
|
|
|
|
Daniel Turini wrote:
Use VMWare
Yummm, tasty
Regards,
Venet.
--------
Black holes are where God divided by zero.(Steven Wright)
|
|
|
|
|
Don't write buggy code?
I have no problem at all creating software for 98/Me/NT4/W2K/XP. We dropped 95 for some API reasons.
Chances are you are depending on versions of DLLs that you shouldn't. Many times this is COMCTL32 (which is well documented so you only have yourself to blame.) Are you depending on SHLWAPI? Also not available on all versions of the operating systems and also well documented.
You depending on them having IE6 installed?
MDAC?
MFC?
CRTL?
Tim Smith
"Programmers are always surrounded by complexity; we can not avoid it... If our basic tool, the language in which we design and code our programs, is also complicated, the language itself becomes part of the problem rather that part of the solution."
Hoare - 1980 ACM Turing Award Lecture
|
|
|
|
|
I have windows xp proffesional.I install SQLServer2000 enterprise edition.When I wanted to install "SQL Server Components" it tell me it can't install server tools in this operating system and installed only client tools.
After installation I run Query analyzer.I have to connect to SQL Server.My compuetr name is 'MAZY' and I typed its name the name of server name.But when I clicked to connect to server I got this error:
---------------------------
SQL Query Analyzer
---------------------------
Unable to connect to server MAZY:
Server: Msg 17, Level 16, State 1
[Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.
---------------------------
OK
---------------------------
I tried "windows authenication" and "SQL Server authenication" too.I get the same thing.In enterprise manager when I want to register my server I get the same error.Any idea?
Mazy
"If I go crazy then will you still
Call me Superman
If I’m alive and well, will you be
There holding my hand
I’ll keep you by my side with
My superhuman might
Kryptonite"Kryptonite-3 Doors Down
|
|
|
|
|
I'm sure you can only install on a server, for example W2K Server.
Old Simon HB9DRV
|
|
|
|
|
Thank you very much.
Mazy
"If I go crazy then will you still
Call me Superman
If I’m alive and well, will you be
There holding my hand
I’ll keep you by my side with
My superhuman might
Kryptonite"Kryptonite-3 Doors Down
|
|
|
|
|
You can install MSDE instead of SQL Server on your client machine. MSDE is the desktop version of SQL Server and is rather nice for developing applications targetted at SQL Server.
Michael
Look, try and use your intelligence, man, even if you are a politician. - The Doctor
|
|
|
|
|
Hi CP,
This one's a little embarassing  I enabled the "Auto-logon" feature on my Win2k box about 4 months ago (after re-installing the OS). I thought it'd be a great idea to do this 'cuz it'll be ready to go after I boot. Now I would like to use PSTools to do some remote administration from work, BUT I forgot the password. Does anyone know of any password recovery tools that I can use.
TIA
Mark Donkers
A witty saying proves nothing.
-- Voltaire
|
|
|
|
|
Hi,
As far as I know, password is stored in clear text on registry. Have you tried using TweakUI utility ?
Can't remember the exact location of the key that holds password. It is something along HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\Logon
Regards,
Venet.
--------
Black holes are where God divided by zero.(Steven Wright)
|
|
|
|
|
Thanks Venet.
TweakUI does show the asterisks and lets me know how many characters it is. I downloaded a utilty that will reveal what the asterisks are in a text box, but not the TweakUI one. The Copy right-click is disabled as well, so i can't do a cut and paste. Grrrrrrrrr... 
Any other ideas???
Mark Donkers
A witty saying proves nothing.
-- Voltaire
|
|
|
|
|
Hi Mark,
Well try another thing.
I just looked at my computer and found this registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
There should be some values there like
DefaultUserName and DefaultPassword
See if you can get those and let me know
Regards,
Venet.
--------
Black holes are where God divided by zero.(Steven Wright)
|
|
|
|
|
Thanks again. Unfortunately, it's still a "no-go". I found the DefaultUserName key, but no DefaultPassword.
Any more ideas In the mean time, I'll try and find some more utilities.
Mark Donkers
A witty saying proves nothing.
-- Voltaire
|
|
|
|
|
Well if registry fails then you can try creating another username and add it to Administrator group. Then delete the old Administrator.
I'm runing of ideas now. 
[edit]
Try this utility. I just tested and worked fine:
http://www.codeproject.com/dll/pwdspy.asp
[/edit]
Regards,
Venet.
--------
Black holes are where God divided by zero.(Steven Wright)
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
